Introducing Stream Servlet in loklak Server

A major part of my GSoC proposal was adding stream API to loklak server. In a previous blog post, I discussed the addition of Mosquitto as a message broker for MQTT streaming. After testing this service for a few days and some minor improvements, I was in a position to expose the stream to outside users using a simple API.

In this blog post, I will be discussing the addition of /api/stream.json endpoint to loklak server.

HTTP Server-Sent Events

Server-sent events (SSE) is a technology where a browser receives automatic updates from a server via HTTP connection. The Server-Sent Events EventSource API is standardized as part of HTML5 by the W3C.

Wikipedia

This API is supported by all major browsers except Microsoft Edge. For loklak, the plan was to use this event system to send messages, as they arrive, to the connected users. Apart from browser support, EventSource API can also be used with many other technologies too.

Jetty Eventsource Plugin

For Java, we can use Jetty’s EventSource plugin to send events to clients. It is similar to other Jetty servlets when it comes to processing the arguments, handling requests, etc. But it provides a simple interface to send events as they occur to connected users.

Adding Dependency

To use this plugin, we can add the following line to Gradle dependencies –

compile group: 'org.eclipse.jetty', name: 'jetty-eventsource-servlet', version: '1.0.0'

[SOURCE]

The Event Source

An EventSource is the object which is required for EventSourceServlet to send events. All the logics for emitting events needs to be defined in the related class. To link a servlet with an EventSource, we need to override the newEventSource method –

public class StreamServlet extends EventSourceServlet {
    @Override
    protected EventSource newEventSource(HttpServletRequest request) {
        String channel = request.getParameter("channel");
        if (channel == null) {
            return null;
        }
        if (channel.isEmpty()) {
            return null;
        }
        return new MqttEventSource(channel);
    }
}

[SOURCE]

If no channel is provided, the EventSource object will be null and the request will be rejected. Here, the MqttEventSource would be used to handle the stream of Tweets as they arrive from the Mosquitto message broker.

Cross Site Requests

Since the requests to this endpoint can’t be of JSONP type, it is necessary to allow cross site requests on this endpoint. This can be done by overriding the doGet method of the servlet –

@Override
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
     response.setHeader("Access-Control-Allow-Origin", "*");
    super.doGet(request, response);
}

[SOURCE]

Adding MQTT Subscriber

When a request for events arrives, the constructor to MqttEventSource is called. At this stage, we need to connect to the stream from Mosquitto for the channel. To achieve this, we can set the class as MqttCallback using appropriate client configurations –

public class MqttEventSource implements MqttCallback {
    ...
    MqttEventSource(String channel) {
        this.channel = channel;
    }
    ...
    this.mqttClient = new MqttClient(address, "loklak_server_subscriber");
    this.mqttClient.connect();
    this.mqttClient.setCallback(this);
    this.mqttClient.subscribe(this.channel);
    ...
}

[SOURCE]

By setting the callback to this, we can override the messageArrived method to handle the arrival of a new message on the channel. Just to mention, the client library used here is Eclipse Paho.

Connecting MQTT Stream to SSE Stream

Now that we have subscribed to the channel we wish to send events from, we can use the Emitter to send events from our EventSource by implementing it –

public class MqttEventSource implements EventSource, MqttCallback {
    private Emitter emitter;


    @Override
    public void onOpen(Emitter emitter) throws IOException {
        this.emitter = emitter;
        ...
    }

    @Override
    public void messageArrived(String topic, MqttMessage message) throws Exception {
        this.emitter.data(message.toString());
    }
}

[SOURCE]

Closing Stream on Disconnecting from User

When a client disconnects from the stream, it doesn’t makes sense to stay connected to the server. We can use the onClose method to disconnect the subscriber from the MQTT broker –

@Override
public void onClose() {
    try {
        this.mqttClient.close();
        this.mqttClient.disconnect();
    } catch (MqttException e) {
        // Log some warning 
    }
}

[SOURCE]

Conclusion

In this blog post, I discussed connecting the MQTT stream to SSE stream using Jetty’s EventSource plugin. Once in place, this event system would save us from making too many requests to collect and visualize data. The possibilities of applications of such feature are huge.

This feature can be seen in action at the World Mood Tracker app.

The changes were introduced in pull request loklak/loklak_server#1474 by @singhpratyush (me).

Resources

Continue ReadingIntroducing Stream Servlet in loklak Server

Using Mosquitto as a Message Broker for MQTT in loklak Server

In loklak server, messages are collected from various sources and indexed using Elasticsearch. To know when a message of interest arrives, users can poll the search endpoint. But this method would require a lot of HTTP requests, most of them being redundant. Also, if a user would like to collect messages for a particular topic, he would need to make a lot of requests over a period of time to get enough data.

For GSoC 2017, my proposal was to introduce stream API in the loklak server so that we could save ourselves from making too many requests and also add many use cases.

Mosquitto is Eclipse’s project which acts as a message broker for the popular MQTT protocol. MQTT, based on the pub-sub model, is a lightweight and IOT friendly protocol. In this blog post, I will discuss the basic setup of Mosquitto in the loklak server.

Installation and Dependency for Mosquitto

The installation process of Mosquitto is very simple. For Ubuntu, it is available from the pre installed PPAs –

sudo apt-get install mosquitto

Once the message broker is up and running, we can use the clients to connect to it and publish/subscribe to channels. To add MQTT client as a project dependency, we can introduce following line in Gradle dependencies file –

compile group: 'net.sf.xenqtt', name: 'xenqtt', version: '0.9.5'

[SOURCE]

After this, we can use the client libraries in the server code base.

The MQTTPublisher Class

The MQTTPublisher class in loklak would provide an interface to perform basic operations in MQTT. The implementation uses AsyncClientListener to connect to Mosquitto broker –

AsyncClientListener listener = new AsyncClientListener() {
    // Override methods according to needs
};

[SOURCE]

The publish method for the class can be used by other components of the project to publish messages on the desired channel –

public void publish(String channel, String message) {
    this.mqttClient.publish(new PublishMessage(channel, QoS.AT_LEAST_ONCE, message));
}

[SOURCE]

We also have methods which allow publishing of multiple messages to multiple channels in order to increase the functionality of the class.

Starting Publisher with Server

The flags which signal using of streaming service in loklak are located in conf/config.properties. These configurations are referred while initializing the Data Access Object and an MQTTPublisher is created if needed –

String mqttAddress = getConfig("stream.mqtt.address", "tcp://127.0.0.1:1883");
streamEnabled = getConfig("stream.enabled", false);
if (streamEnabled) {
    mqttPublisher = new MQTTPublisher(mqttAddress);
}

[SOURCE]

The mqttPublisher can now be used by other components of loklak to publish messages to the channel they want.

Adding Mosquitto to Kubernetes

Since loklak has also a nice Kubernetes setup, it was very simple to introduce a new deployment for Mosquitto to it.

Changes in Dockerfile

The Dockerfile for master deployment has to be modified to discover Mosquitto broker in the Kubernetes cluster. For this purpose, corresponding flags in config.properties have to be changed to ensure that things work fine –

sed -i.bak 's/^\(stream.enabled\).*/\1=true/' conf/config.properties && \
sed -i.bak 's/^\(stream.mqtt.address\).*/\1=mosquitto.mqtt:1883/' conf/config.properties && \

[SOURCE]

The Mosquitto broker would be available at mosquitto.mqtt:1883 because of the service that is created for it (explained in later section).

Mosquitto Deployment

The Docker image used in Kubernetes deployment of Mosquitto is taken from toke/docker-kubernetes. Two ports are exposed for the cluster but no volumes are needed –

apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: mosquitto
  namespace: mqtt
spec:
  ...
  template:
    ...
    spec:
      containers:
      - name: mosquitto
        image: toke/mosquitto
        ports:
        - containerPort: 9001
        - containerPort: 8883

[SOURCE]

Exposing Mosquitto to the Cluster

Now that we have the deployment running, we need to expose the required ports to the cluster so that other components may use it. The port 9001 appears as port 80 for the service and 1883 is also exposed –

apiVersion: v1
kind: Service
metadata:
  name: mosquitto
  namespace: mqtt
  ...
spec:
  ...
  ports:
  - name: mosquitto
    port: 1883
  - name: mosquitto-web
    port: 80
    targetPort: 9001

[SOURCE]

After creating the service using this configuration, we will be able to connect our clients to Mosquitto at address mosquitto.mqtt:1883.

Conclusion

In this blog post, I discussed the process of adding Mosquitto to the loklak server project. This is the first step towards introducing the stream API for messages collected in loklak.

These changes were introduced in pull requests loklak/loklak_server#1393 and loklak/loklak_server#1398 by @singhpratyush (me).

Resources

Continue ReadingUsing Mosquitto as a Message Broker for MQTT in loklak Server